Estimated delivery time may vary due to the following:
Item location.
Purchase quantities.
Your shipping address.
Selected shipping carrier.
Date of confirmed payment.
Seller's processing time on item customization.
Order status can be shown at your Buyer Center.
Voltage Regulation < ±1%.
Can Be Use In Parallel Operation.
Wider Sensing Input 90~520 VAC.
50/60 Hz Selectable By Jumper.
Sensing Voltage Loss Protection.
Soft Start Voltage Ramping.
Under Frequency LED Indicator.
Can Be Set to Suit Different Power Generator by Jumper.
Model No. EA440-T.
Sensing Input Terminal 0-110V = 90~150V.
Terminal 0-220V = 175~260V.
Terminal 0-380V = 350~520V.
Power Input Voltage 100~264 VAC single phase.
Output Voltage Max. 90 VDC at 207 VAC.
Current Continuous 4A, Intermittent 10A for 10 sec.
Resistance Min. 15 Ohm.
Voltage Regulation < ±1% (with 4% engine governing).
Voltage Build-up Residual volts at AVR terminal > 5 VAC.
External Volts Adjustment ±8% with 1 K Ohm 1 watt trimmer.
Unit Power Dissipation Max. 12 watt.
Thermal Drift 0.05% per °C change in AVR ambient.
Under Frequency Protection U/F potentiometer 45~60 Hz.
Analogue Input Max. Input ±5 VDC.
Sensitivity 1V for 5% generator volts.
Input resistance 1 K Ohm.
DROOP Input Burden 10 Ohm.
Max. Sensitivity 0.07A for 5% droop (PF=0).
Max. Input 0.33A.
Environment Operating Temperature: -40~60 °C.
Storage Temperature: -40~85 °C.
Relative Humidity: Maximum 95%.
Vibration: 1.5G @ 5~30 Hz / 5.0G @ 30~500 Hz.
AVR Controls Functions VOLT: Voltage Adjustment.
STAB: Stability Adjustment.
U/F: UFRO Knee Point Set.
DROOP: Droop Adjustment.
TRIM: Analogue Input Adjustment.
DIP: U/V Rate Set.
Dimensions 150.0 (L) X 135.0 (W) X 40.0 (H) mm.
Weight 489 g ±2%.
*Note: All features & specifications subject to change without notice.
