Estimated delivery time may vary due to the following:
Item location.
Purchase quantities.
Your shipping address.
Selected shipping carrier.
Date of confirmed payment.
Seller's processing time on item customization.
Order status can be shown at your Buyer Center.
SPECIFICATIONS:
TECHNICAL SPECIFICATIONS:
Isochronous Operation/Steady State Stability ± 0.25% or better
Speed Range/Governor 1K-7.5K Hz continuous
Speed Drift with Temperature ± 1% Maximun
IDLE Adjustment 160 ± 20Hz ~ 60% of set speed
Droop adjustment Min.(K-L Jumpered) 15Hz. ± 6Hz. Per 1.0 A change
Droop adjustment Max.(K-L Jumpered) 400Hz. ± 75Hz. Per 1.0 A change
Droop Adj. Max. (K-L Jumpered) 875Hz., ± 75Hz. Per 1.0 A change
Droop Adj. Min. (K-L Jumpered) 15Hz., ± 6Hz. Per 1.0 A change
Speed Trim Range ± 200Hz.
Remote Variable Speed Range 500 -7.5Hz. Or any part thereof
Terminal Sensitivity J: 100Hz., ± 15Hz/Volt @ 5.0 K Impedance
L: 735Hz., ± 60Hz/Volt @ 65 K Impedance
N: 148Hz., ± 10Hz/Volt @ 1Meg. Impedance
P: 10V DC Supply @ 20ma Max.
Speed Switch Adjustment Range 1000-10000Hz.
ENVIRONMENTAL:
Ambient Operating Temperature Range -40°c to +85°c
Relative Humidity up to 95%
Storage Temperature -55°c ~ 90°c
Shock 20-100HZ 500mm/Sec.
INPUT POWER:
Supply 12 or 24V DC Battery Systems(Transient and Reverse Voltage Protected)
Polarity Negative Ground(Case Isolated)
Power Consumption 50mA continuous plus actuator current
Actuator Current Range @ 25°c-(Inductive Load) Min. 2.5 Amps, Max. 10 Amps continuous
Speed Sensor Signal 0.5-120 V RMS
Speed Switch Relay Contacts(N.O.And N.C.) 10Amp
PHYSICAL:
Weight 650g