Estimated delivery time may vary due to the following:
Item location.
Purchase quantities.
Your shipping address.
Selected shipping carrier.
Date of confirmed payment.
Seller's processing time on item customization.
Order status can be shown at your Buyer Center.
TK228 OBD-II GPS Tracker is a multifunctional product. It is an integration of GPS tracking system, RFID car alarm system & OBD-II Diagnostic system. It's plug and play design. Easy to install.
The device will fetch those important data (speed, rpm, odometer, speed, driver behavior data...Etc) via CAN-BUS and send out by GPRS network or by blue-tooth connection.
It adapts 2.4GHz RFID technology, which can make it work as a simple keyless alarm system with easy installation. In arm status, the following operations will trigger alarm: Engine on, vibration, cut-off power & take-out of the device. The system will send out alarm message with location by SMS/GPRS to your mobile phone or tracking center immediately.
Its Features & Functions as follow:
1. Plug & play design with OBD-II connector, compatible with all the vehicles with OBD-II connector, supports most of vehicles with the CAN-BUS;
2. It is the integration of GPS tracker + RFID car alarm + Wireless immobilizer;
3. Arm/disarm by SMS/phone call, or by 2.4G RFID tag automatically;
4. Check the real physical address (such as city name, street name. ) directly;
5. Track by SMS/website to get the latitude, longitude, speed, direction & odometer etc.;
6. Movement alarm, Over-speed alarm, Geo-fence alarm;
7. Engine on alarm, power failure alarm, vibration alarm;
8. Anti-tamper alarm. Once the device is disconnected, it will trigger the alarm;
9. Built-in shock sensor for power saving & triggering vibration alarm;
10. Monitor the voice;
11.2. 4G long-distance contactless RFID tag for driver ID identification;
12. Keyless RFID car alarm function, arm/disarm automatically;
13. Accurate odometer & speed reading directly via CAN-BUS;
14. Data logger 4MB for offline GPS waypoint;
15. Wireless immobilizer to stop the car in safe mode;
16. High reliable anti-tamper design. If the unit is unplug illegally, it will lock the engine automatically.;
17. Built-in rechargeable backup battery; When the car battery is cut off or damaged, the built-in backup battery can work for emergency check, and the system will send out power failure alert immediately;
18. Two kinds of location information: GPS coordinates & GSM base station code;
19. Remote diagnostics function. Transmission of the CAN data via GPRS network: (1) Vehicle's real-time data: Battery's voltage, RPM, speed, TAP throttle opening, engine load, coolant temperature, fuel consumption, odometer, error code & times, acceleration times & deceleration times; (2) Driver behavior data: Ignition time, total driving time, total idling time, average engine hot-start time, average speed, history high speed, history RPM, total acceleration times & total deceleration times;
20. Read the vehicle's error code & clear the error code via GPRS.
