Estimated delivery time may vary due to the following:
Item location.
Purchase quantities.
Your shipping address.
Selected shipping carrier.
Date of confirmed payment.
Seller's processing time on item customization.
Order status can be shown at your Buyer Center.
Description
Flexibond 8265/8201 is a two-component polyurethane adhesive which is used for bonding jointing strips between synthetic grass sheets.
Characteristics
(1) No solvent, environmental friendly
(2) Uniform paste, easy to use
(3) Good adhesion and elasticity
(4) Excellent weather resistance
Technical Data of Flexibond 8265
*Testing temperature 23ºC and 50% RH
Flexibond 8265Flexibond 8201
Curing mechanismPoly addition
ColorGreen (can be adjusted) Brown
Color after mixing Green (can be adjusted)
Viscosity100000-150000mpa. S
(Brookfield - RVT 7/20) 200-250mpa. S
(Brookfield - RVT 2/20)
Viscosity (after mixing) 50000-100000mpa. S (Brookfield - RVT 7/20)
Mixing ratio (by weight) 91
Solid content100%100%
Pot life30-50 mins
Open time40-60 mins
Initial cure time2 hours
Set to light food traffic12 hours
Recommended working temperature0ºC-30ºC
Shear strength (EN 12228-EN13744) >1500N/100mm
Peel strength (EN 12228-EN13744) >100N/100mm
Shelf life (unopened below 25ºC) 12 months6 months
Application
(1) Preparation
Substrates Preparation
According to the synthetic grass usage, substrates must be prepared according to current regulations and standards.
Synthetic Grass Preparation
Unroll and spread out the synthetic grass for several hours before starting installation to allow internal tension caused by the packaging to be reduced.
Adhesive Preparation
Empty barrel for mixing the adhesive: Must be clean and dry.
Mixing tool: Stick for mixing manually or electric mixer.
Electronic scale.
(2) Applying Process
Flexibond 8265/Flexibond 8201=9: 1 (by weight)
The resin Flexibond 8265 should be mixed thoroughly before its mixing with the hardener Flexibond 8201. Mix the two components fast till the color is uniform, then mix for 1-2 more minutes.
Apply the adhesive with a notched trowel to achieve a fine appearance and effect.
Use up the mixer as soon as possible before its pot life.
(3) Pressing
Bond synthetic grass joint strips and press within adhesive open time, or the adhesion effect will be affected. Increase the pressure as high as possible with affecting the material forming.
(4) Clean
Packaging
Resin: 9kg/barrel, 27kg/barrel
Hardener: 1kg/barrel, 3kg/barrel
The packaging can be adjusted according to customer's requirement.
Storage and Shelf Life
The product remains stable for 12 months (component A) , 6 months (component B) if stored in its original sealed container, under shady and ventilated condition, avoiding direct sunlight and rain.
Recommended storage temperature: 0-30ºC.