Estimated delivery time may vary due to the following:
Your shipping address.
Selected shipping carrier.
Date of confirmed payment.
Seller's processing time on item customization.
Order status can be shown at your Buyer Center.
Applications: Widely used in production site to measure surface roughness of various machinery-processed parts, calculate correspondingparameters according to selected measuring conditions and clearly display all measurement parameters.
Features: * Be compatible with the principles of ASTM D 4417-B, IMO MSC. 215 (82) , SANS 5772, US Navy NSI 009-32, US Navy PPI 63101-000. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism inside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causesdisplacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and thenoutputs the measurement results on LCD.
4 digits, LCD
±5% or ±5 µm, (whichever is the greater)
0.1 μm (When Measurement Value Less than 100 μm)
(1 μm When Measurement Value ≥ 100 μm)
Temperature: 0 ~ 50 Celsius; Humidity < 80 %RH
4 x 1.5v AAA size (UM-4) battery
162 × 65 × 28 mm
1. Main Unit
2. Carrying Case
3. Instruction Manual
1. USB, RS-232C data cable with software
2. Bluetooth data out put with software