Estimated delivery time may vary due to the following:
Item location.
Purchase quantities.
Your shipping address.
Selected shipping carrier.
Date of confirmed payment.
Seller's processing time on item customization.
Order status can be shown at your Buyer Center.
THINKCAR THINKTOOL Pros 10inch Car full system Scanner bluetooth wifi with 28 Special service, support ECU Coding programming ,ADAS Calibration, Active test+ Android 10 OS running on 10-inch HD IPS Touch Screen + 64GB Memory + 2 years free update online
You Deserve to Have a THINKCAR THINKTOOL PROS
1.High-end online programming capabilities 2.Powerful Quad-Core 2.0GHz processor with 4G+64G Hardware Configuration 3.OE-Level Wireless Intelligent Diagnostics, covering more than 100 car makes 4.Unique Modular Design, supporting up to 8 functional modules for any application scenarios 5.Android 10 OS running on 10-inch HD IPS Touch Screen 6.Supporting 28 Service Reset Functions, more to cover soon 7.Topological Graph 8.Supporting ADAS Calibration 9.Remote Technical Support via TeamViewer
THINKCAR THINKTool PRO supports Full system diagnostic :
Engines/Auto Transmission/Airbags/Immobilizer/Key Coding/ABS/Cruise Control/Instruments/ Self Leveling Suspension systems/Seats/Doors/Gateway/Steering Angle/Air Suspension/Body Systems/Electronic Power Steering & Motor Assisted/Power Steering/Tyre Pressure/Rain Sensors/4WD System/Stabilizer/Intelligent Parking Assist/Door Motors/Audio Systems/Air Conditioning/Tiptronic/Anti Theft/Soft Top/Headlamp Leveling/Central Locking/Automatic Clutch/ DPF Reset/Electric Windows/Plip Programming/Heated Rear Window/Xenon Headlights/Wash Wipe/Fuel Burning Heater/Transfer Box/Seat Memory/Oil Life Service Reset/Sliding Doors/Electronic Throttle/Navigation System/Rollover Sensor/Cruise Control/ Multi Function Steering Wheel/Aux Heating/Electronic Parking Brake/Clutch Electronics etc.( Great for car repair shops and mechanics to improve business)
THINKCAR THINKTOOL PROS has 28 service functions:
1.Oil Reset 2.DPF Regeneration 3.AFS(headlamp) Reset 4.EGR Adaption 5.Brake-pad Reset 6.Immobilize 7.Windows Calibration 8.Coolant Bleeding 9.Steering Angle Reset 10.Injector Coding 11.Seat Calibration 12.Transport Mode 13.Battery Matching 14.Airbag Reset 15.Tyre Reset 16.ODO Reset 17.ABS Bleeding 18.Gear Learning 19.Language Change 20.Adblue Reset 21.Elec. Throtle Adaption 22.Suspension Matching 23.AIF Reset 24.Nox Sensor Reset 25.TPMS Reset 26.AT Learning 27.Sunroof Initialization 28.Stop/Start Reset
THINKCAR ThinkTool Pros Function :
-1.Online Programming ( Need pay for the function )
Think Tool Pros+ supports programming and coding, which is to write the relevant control information of the software into the automotive computer's programmable EPROM or FLASH by making use of the electronic communication transmission technology. ThinkTool PROS+ Support intelligent recognition of programming files, convenient and quick operation.Support for Mercedes-Benz, for Benz New Energy, for BMW, for BMW New Energy, for GM, General New Energy, for Ford,
-2.ADAS calibration
Advanced Driver Assistance System (ADAS) is an electronic component in a vehicle, including various safety functions of the vehicle, such as automatic emergency braking (AEB), lane departure warning (LDW),lane keeping assist, blind spot elimination, night vision camera and Adaptive lighting. The function on the equipment is disabled by default, and the user needs to activate the function with an activation card before using it. And this function needs to be matched with THINKCAR ADAS calibration tools. Mainly used to calibrate various camera and radar of driver assistance systems
-3.TPMS Diagnostic function
THINKTOOL Pros+/Pros can work with wireless tire pressure diagnostic tool (optional accessory) toachieve the features of TPMS activation, programming and learning. a)Activation:to activate the sensor's IlD, wheel pressure, sensor frequency, tire temperature and battery status. b)Programming:to program sensor data to a blank Thinkcar sensor, so as to replace a sensor that is in low battery and does not function properly. There are three sensor programming methods available:automatic, manual, and via activation replication. c) Learning:to write the sensor ID into the vehicle ECU for sensor identification.
-4.Modular expansion:
Support some optional modules: printer, work light, videoscope, battery tester, scope box, thermal imager, moudledock, wireless TPMS tool, HD Package (note: you can buy those model on ThinkStore)
-5.12 Data Graphs shows in the Same Screen, it is better you can compare and Analysis the Data , easy to find the problem of the car !
-6.With HD Package , ThinkTOOL PROS Supports 12V cars and 24V trucks , but pls note HD package need pay additional
THINKCAR THINKTool PROS Supports Complete 10 OBD2 functions
1.Reading Codes
Show the detailed description of the Diagnostic Trouble Code (DTCs)
2.Erasing Codes & Reset
Turns off Check Engine Light (MIL), clears codes and resets monitors.
3.Data Stream
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4.I/M Readiness Status
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5.Read Live Data Stream
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.View Freeze Frame Data
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7.O2 Sensor Test
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.
8.On-Board Monitor Test
Retrieves and displays test results for emission-related powertrain components and systems.
9.Read Vehicle Information
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10.Component Test
Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
THINKCAR THINKTool PROS Language :
English,German,Spanish,French,Italian,Japanese,Portuguese,Russian ,Chinese
The Other Function of THINKCAR THINKTool PROS :
Auto VIN read Function : It can read VIN information automanually when you connect Car , fast get the inforamtion .
Quick test:It enables you to quickly access all the electronic control units of the vehicle and generate a detailed report about vehicle health.support system scan and system select System Scan: automatically scan all systems of the vehicle System Selection: manually choose the automotive electronic control system.
Quick Check and Printing: It adopts smart detection mode. After the vehicle is connected, the system will automatically recognize the vehicle information, automatically check the vehicle, and automatically generates a report. Automatic printing can be set so that no human intervention is needed throughout the process.
Actuation Test: This function is used to test whether the execution components in the electronic control system can work ECU CODING: The Coding function is used to re-flash the vehicle control modules, it allows you to reprogram adaptive data for certain components after making repairs or replacements.
Graphical display : Combine: Displayed in graph merge status for data comparison. Value: Displayed the parameters in values and shown in list format.
Customize: Customize the data stream option to be viewed. Tap the button, a pull-down list of the data stream items appears on the screen. Select the desired items (max12 items), and then screen will display the waveforms corresponding to these items immediately. If need to remove any items, just deselect them.
Multi-Language supported You can select the language of your country to operate THINKCAR THINKTOOL PROS+ with one click
Diagnostic Feedback: If you encounter an unresolved problem or diagnostic software bug during diagnosis, you can revert the most recent 20 test records to Thinkcar Team. When we receive your feedback, we will analyze and troubleshoot it in a timely manner, to improve the quality of our products and user experience.
Quick print diagnostic reports: Thermal printer, work with the main unit, also can work with module dock. Quick print diagnostic reports anytime and anywhere
High-end hardware configuration of THINKCAR ThinkTool Pros :
Operating System: Android 10
Camera:Rear camera 8.0MP
Memory:4G
Network:Wi-Fi, WL AN 802. 11b/g/n
Storage:64G(Pros)
Bluetooth: Bluetooth 5.0
Battery: 6000mAh/7.6V
Working Temperature: 0°C ~ 50°C
Screen: 10 inches Storage
Temperature:-20°C ~ 60°C
