DRO for milling machine&lathe machine (LD-200)
LD series multi-function digital readouts can be installed on all kinds of lathe machine, drilling machine, milling machine, Video measuring system, Tool-presetter and so on, which can supply the positioning and metrology functions together with our linear scales.
DRO can match CARMAR, RATIONAL, SINO, EASSON, CHFOIC brand linear scale and so on, customer needs to supply us whose linear scale they want to connect, we can change the pin signal accordingly or customer change himself.
We have digital readout system for 2 axis, 3 axis, 4 axis and EDM
1. Plastic body
2.999 sets of SDM coordinate
3. Zero setting
4.1/2 calculation, locating work piece center
5. Mm/inch conversion
6. INC/ABS conversion
7. Resolution selection:
0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02, 0.05
8. Diameter/Radius selection
9. DIR: Setting the coordinate direction
10. Shrink function
11. Math. Calculating
12. Multiple machining functions:
(1) Bolt Circle machining
(3) Divide holes on an oblique line
(4) Machining on an oblique line
13. Setting and recalling a datum for machining
14. Error compensation: Linear compensation
15. Instant power failure memory
16. Power consumption: AC90V-245V
A. LD-200 two-axis digital readout
B. LD-300 three- axis digital readouts
C. LD-400 four-axis digital readout
D. LD-300E appropriate for EDM machine only
E. Voltage: AC90V-240V
F. Linear scale's signal: TTL square wave, RS422 end different wave, Frequency<2MHz, Current>1mA.
Here is technical parameter and pin singnal.